Image 1

Nacra 5.2 Old (74.5'') Catamaran Trampoline - Bias Cut Mesh

Calculated at checkout
Related Products
Product Videos
Why SLO Sails
Also Viewed
By Category
Other Details
  • Product Description

    *Check Your Boat: The Nacra 5.2 was produced in two widths, also, non-USA Nacra catamarans may require a narrower trampoline. Measure your boat to make sure it is the same width as listed below. Also click here for more information
    Nacra 5.2
    "Old" Before hull #521 Width: 74.5" (189.2cm)
    "New" After Hull#521: Width: 72.5" (184.1cm)

    Please measure your boat. We are not liable for shipping you the wrong trampoline if you don't measure!

    Please let us know if your boat has a center tube. The image of the black trampoline has a center tube.

    Please let us know if your trampoline had jib strop cutouts. Some boats have jib wires that were only on top of the trampoline. Other boats have jib wires that penetrate the trampoline. We put the jib cutouts 30" and 42" aft of the forward edge 7-11" from the side rail. The cutout is reinforced with webbing and two rows of sewing. We have spent many hours developing these trampolines to our high quality standards and our trampolines are very well built with these unique features:

    • bias cut one-piece design for uniform tension
    • rear lacing only with built in rear linecatcher
    • 12" x 12" halyard pocket near the mast base
    • adjustable hiking straps
    • made of high-quality and very durable trampoline mesh (8oz. polypropylene basket weave mesh)
    • sewn with large size V-138 UV-stabilized polyester thread
    • heavily reinforced with 3" wide heavy-weight polypropylene webbing in rear grommet areas
    • at least five rows of stitching in high-load areas (compared to 2 rows from other manufacturers)
    • we personally pound each #4 spur grommet by hand (spur grommets are tough; they have 'teeth' that bite into the fabric)
    • one-year warranty against defects in materials and workmanship
    • aft lace tube just like the stock trampoline
    • three grommets on each side rail; 1 grommet for the trapeze bungee and 2 grommets for the daggerboard bungee


    You can download our trampoline replacement guide here which will aid in disassembling the boat.

    Slideshow image

    Prev Next


  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Why SLO Sails

    Why SLO Sail and Canvas?

    Because we take the time to make sure you are getting what you want and need. Our knowledgeable designers are available by phone or email and can work with you to incorporate any special requests. Our products are warranted against defects due to workmanship or material flaws for 1 year. All our products are made in the USA, on the central coast of California.

  • Find Similar Products by Category