This sailboat mast up cover will completely enclose your American 14.6 deck protecting it from the elements. Our American 14.6 mooring cover fits snugly below the rub rail of the hull to seal out dirt and water. The cover installs securely with an elastic cord and tie down points. This cover is installed with the mast up and has four cutouts: one for the mast two for the shrouds and one for the forestay. All four cutouts have Velcro closures and a large #10 YKK zipper is used between the mast base cutout and the starboard shroud cutout for ease of use and durability. The zipper is also covered with a flap of fabric and snaps to increase UV resistance. This cover will be made without a motor mount cutout unless the option is selected (please enter "none" for measurments). The American 14.6 boats we have looked at have a motor mount on the stern Port side. We will need the mount's location on the transom and its distance from the bottom of the gunwale as each boat has a tendency to vary. We offer this cover in three different fabric choices depending on your needs; the details of each fabric can be found below in the dropdown table. We offer this cover in three different fabric types, look over the fabrics in the drop down chart below.
A= From Gunwale to top of motor mount
B= From Center line of the transom to the close side of the motor mount
C= From Center line of the transom to the far side of the motor mount
Why SLO Sail and Canvas?
Because we take the time to make sure you are getting what you want and need. Our knowledgeable designers are available by phone or email and can work with you to incorporate any special requests. Our products are warranted against defects due to workmanship or material flaws for 1 year. All our products are made in the USA, on the central coast of California.