Tasar Sailboat Mooring Cover - Boat Mast Up Flat Cover

Overview:

Our Tasar sailboat mast up cover will completely enclose your Tasar deck, protecting it from the elements. Our Tasar cover fits snugly below the rub rail of the hull to seal out dirt and water. The cover installs securely with an elastic cord and tie down points.

This cover is installed with the mast up and has four cutouts: one for the mast two for the shrouds and one for the forestay. The shroud cutouts are designed to allow the for the shrouds to be set all the way forward/loose on the shroud track to about middle of the track. The cut outs for the shrouds and forestay are closed off to the edge of the cover with a Velcro flaps. Then there is a side release buckle at the bottom of the opening so you can attache the bungee together in the hem.  There is a large #10 YKK zipper is used between the mast base cutout and the starboard shroud cutout for ease of use and durability. The zipper is also covered with a flap of fabric to increase life of the zipper by protecting it from UV damage.

This sailboat cover is compatible with our Tasar Bottom Cover if you want to completely enclose your boat. 

You can add straps and/or reflective tape in the upgrade menu found above.

We offer this cover in three different fabric types, look over the fabrics in the drop down chart below.

Additional Info: 

Click here to see the different types of covers that we build with photos and descriptions.  

CLICK HERE TO VIEW OUR BOAT COVER CLEANING AND CARE GUIDE