As shown in the picture, this Minifish® cover is a cross between our top flat cover and our mast up cover. This cover has the tail on the cover to allow the spars and sail to be stored on deck. It will also be cut wider to make room for the spars on deck. This cover has a large reinforcement at the bow to handle the extra chafe caused by having the spars on deck. This is a great option if you would like to leave all of the equipment for your boat, at your boat, but with the mast down.
Our Minifish® cover fits snugly below the rub rail of the hull to seal out dirt and water. It features a Velcro attachment around the aft section of the boom (the part that hangs over the back of the boat). The cover is held on through most conditions by the elastic cord in the hem and there are tie down points every three feet around the cover if you need to tie it down. This sailboat cover is compatible with our Minifish® hull cover if you want to completely enclose your boat. You can upgrade your cover to include straps (click here for more information) or a bow eye cutout. The straps will be in place of the webbing loops and will go from one side of your cover to the other. We offer this cover in three different fabric types, look over the fabrics in the drop down chart below.
Why SLO Sail and Canvas?
Because we take the time to make sure you are getting what you want and need. Our knowledgeable designers are available by phone or email and can work with you to incorporate any special requests. Our products are warranted against defects due to workmanship or material flaws for 1 year. All our products are made in the USA, on the central coast of California.