Mutineer Daysailing Jib
Our Mutineer jib is proudly designed and manufactured in our San Luis Obispo, California sails loft. This daysailing sail is an identical cut to our racing sail, but with a softer cloth. As always, all of our sails are made 100% in the USA by our highly skilled sailmakers.
*Cloth Material: Challenge Sailcloth-4.18 ounce “Performance Cruise” woven fabric
Fabric comes from one of the premier USA sailcloth makers
*High quality manufacturing techniques for maximum durability
Radial corner patches
Triple step zig-zag stitching on the seams
*Sail bag for a rolled sail
*Computer designed using Autometrix SMSW6 Build 29 sailmaking software, cut out on our in house CNC plotter/cutter, and sewn right here in our SLO sail loft.
NOTE: It is common among Mutineer owners to modify their boats slightly, and in addition, there have been several different builders of the Mutineer over the years, so there are commonly some differences from boat to boat. In order to get a jib that is custom fit to your boat, please provide us with the following information:
**If you have a wire luff or tube luff – The Mutineer class recommends switching to a wire luff due to issues with the place the Hyfield tension lever mounts getting weaker as the boats age. Boats have occasionally been dismasted in a strong wind.
**a. Measurement from the forestay base to the front end of the jib track - Enter into box above
**b. Measurement from the forestay base to the back end of the jib track - Enter into box above
**c. Width between the jib tracks - Enter into box above
Call (805.479.6122) or email us (email@example.com) if you have any questions at all
E-mail a friend about this item.