The Phantom sailboat top cover will completely enclose your Phantom deck, protecting it from the elements. Our Phantom cover fits snugly below the rub rail of the hull to seal out dirt and water. The cover installs securely with an elastic cord and eight tie down points. You can add reflective tape in the upgrade menu found above. We offer this cover in three different fabric types, look over the fabrics in the drop down chart below.
The measurements below corresponding to the measurement diagram above for the Phantom:
A (Length over all) = 170.5 inches
B (Transom)=29 inches
C (Max Beam)=54 inches
D (Max Beam to Bow)=96.5 inches
If you are unsure if your sailboat is a Phantom, please check these measurements on your boat. There are many Sunfish clones out there Phantom being but one. We have covers for some of them on our web page including the Pointer 14, Scorpion, and the SeaGull. Also, if you find that your boat doesn’t match the measurements for any of these, just take a few photos of your boat and send them to us along with the measurements from the drawing. We should be able to make a custom cover for your boat from this information.
Why SLO Sail and Canvas?
Because we take the time to make sure you are getting what you want and need. Our knowledgeable designers are available by phone or email and can work with you to incorporate any special requests. Our products are warranted against defects due to workmanship or material flaws for 1 year. All our products are made in the USA, on the central coast of California.